Drip Edge Profile
The specific cross-sectional shape of drip edge metal, typically classified as Type C (L-shaped), Type D (T-shaped with a kick), or Type F (also called gutter apron). The profile determines how water is directed off the roof edge.
What Is a Drip Edge Profile
A drip edge profile refers to the specific cross-sectional shape of the metal strip installed along the eaves and rakes of a roof, and the profile type determines how effectively water is channeled off the roof edge and away from the fascia and wall below. The three standard profiles are Type C (a simple L-shape), Type D (a T-shape with a hemmed kick at the bottom), and Type F (an extended lower leg that reaches into the gutter, also called a gutter apron).
Choosing the Right Profile
Type C is the most basic and least effective profile. It directs water off the edge but does not actively push it away from the fascia. Type D adds a hemmed lower edge that kicks water outward, reducing fascia rot. Type F extends down into the gutter trough, ensuring water enters the gutter rather than overshooting or running behind it. Most current building codes require Type D or Type F at eaves. At rakes, Type C or D is standard.
Drip Edge Profiles in Estimates
In Xactimate, drip edge line items may differentiate between standard and premium profiles, and pricing varies accordingly. When scoping a re-roof, identify the existing drip edge profile and specify the correct replacement in the estimate. If code now requires a higher-performing profile than what was originally installed, the upgrade qualifies as a code compliance line item. This is a commonly missed detail that supports a legitimate supplement when the adjuster's scope specifies only generic drip edge.
Frequently asked questions
Type C (or L-shaped) is the simplest profile with two straight legs. Type D (or T-shaped) has an added kick or hem that directs water further from the fascia. Type F (gutter apron) has an extended lower leg designed to direct water into the gutter. Most building codes now require Type D or F for better water management.
Yes. Different profiles have different Xactimate pricing. Replacing a Type F drip edge with a Type C is a downgrade. The estimate should specify the correct profile to match pre-loss conditions or meet current code requirements, whichever is greater.
No credit card required